The MD2000B is a FDA cleared Multi-Signs Monitor for noninvasive blood pressure (NIBP), proven arterial oxygen saturation (SpO2) and pulse rate (PR) monitoring all in one compact, lightweight and easy to use unit with impressive functionality. Widely used in hospitals, clinics, emergency medicine, ambulances, etc. It can measure NIBP, SpO2, PR accurately and quickly; and can provide continuous monitoring or spot check measurements of NIBP and SpO2, with the ability to review data in real time and display SpO2 plethysmograph. Equipped with data communication and recording features, powerful analysis software, internal recorder and vehicle power inverter, it can be used during first aid or homecare visit. It can store up to 99 patient data and records up to 72 hours.
TECHNICAL SPECIFICATIONS:
Classification:
Protection class: Type BF defibrillation proof
Safety: IEC60601-1
Patient Range: Adult, pediatrics, neonatal (optional)
NIBP measurement:
Method: Oscillometric
Operation Modes: Manual/Automatic/STAT
Measurement Unit: mmHg/kPa selectable
Measurement Types: Systolic, Diastolic, and Mean
Measurement Range: Infant Adult
SYS 30-135 30-255
DIA 15-110 15-220
MAP 20-125 20-235
Overpressure Protection: Yes
Resolution: 1 mmHg
SpO2:
Display range: 0 100%
Accuracy: 60% - 100% (+/- 2%)
70% - 79% (+/- 3%)
0 69% (unspecified)
Pulse Rate:
Measurement Range: 30-235 bpm
Resolution: 1 bpm
Accuracy: 30 100 (+/- 2bpm)
101 235 (+/- 2%)
0 29 (unspecified)
Display: Type LCD & LED
Alarm: NIBP (SYS, DIA, MAP), SpO2, PR, Probe Off
Dimension: 296mm X 166mm X 96mm
ENVIRONMENTAL
Power: AC: 100 230 V, 50/60 Hz (+/- 3Hz)
Operating temperature: 5 deg. C to 40 deg. C
Storage temperature: -20 deg. C to 55 deg. C
Operating Humidity: ≤ 80%, non-condensing
Storage Humidity: 0 93%, non-condensing
DATA STORAGE
Patient ID: 1 99
Data records: up to 72 hours
DATA TRANSMISSION (Optional)
Data Cable through USB interface
Flash Disk
BATTERY
Type: Built-in rechargeable battery
Operation time: > 2 hours (continuous operation)
PRINTER (Optional):
Type MD2000AP Printer with built-in thermal recorder for MD2000B Vital Signs Monitor. This printer will not work as standalone printer and must be installed at the factory. If you order a printer it will be installed and tested in the factory. You cannot add a printer later if you only order the MD2000B.
Width of printing paper: Standard 50 (+0/-1) mm
TO ORDER PRINTER GO TO LINK "Medical Accessories" on our website.
|
